斜立式夾紙收板機
主要用于外層有孔的對板面要求較高的PCB板的收板.也可用
于內層收板.如:SES線外層前處理、噴錫后處理
It is mainly used for collecting the PCBs with high requirement and holes on the surface in O/L treatment line and it can also be used in I/L such as pretreatment of SES line, post-treatment of tin
spraying.
設備規格/Device Spec:
a. 長x寬x高(L1820*W1840*H1830)mm
b.工作高(STD)/Working Height：WH=900mm±25 mm
c.適用板件規格/PCB Size：Max:610mm*610mm Min：300mm*300mm
厚度/Thickness: 0.3mm-3.2mm 產速/Capacity:7panels/min
設備特點/Features:
1、較適用于表面有孔的板件。
2、具有二段式整板裝置，拍薄板不會有拱起 現象。
3、配合各種板件，人機面板調整參數，達到最佳工作效能。
4、板架交換時具有暫存板件功能。
5、具有夾紙功能。
6、設備耗電，耗氣低且具有省電模式
1. Apply for the board with holes on its surface.
2. Equipped with alignment device via 2 speeds not to cause bends when arranging thin board.
3. Setting parameters on the man-machine interface to cooperate with different panels to achieve the best efficiency.
4. With buffer function when changing the rack.
5. With plastic film suction function.
6. With low power consumption and air consumption and it also has a power saving model.
| 上一主題：小板件放板機 | 下一主題：薄板自動刨邊線 |