氣缸薄板斜立式收(放)板機

主要用于薄板制程. 如:內層前處理、涂布線、自動爆光機、SES等.

It is mainly used in the thin board treatment process, such as pretreatment of I/L, Coating line, Auto Exposure Machine, SES etc.

 設備規格: a：長x寬x高(1400*1100*2110)mm

                              b：工作高(STD)：WH=900mm±25 mm  

                              c：適用板件規格：       

                                    Max:610mm*610mm

                                    Min：250mm*250mm                    

                                    厚度：  0.075mm-3.2mm

                                    產速：8片/分鐘

 Device Spec: a: L 1400mm*W1100mm*H2110mm

                              b: Working Height: 900±25 mm

                              c: PCB Size:

                                  Max: 610mm*610mm

                                  Min:  250mm*250mm

                                  Thickness: 0.075mm-3.2mm

                                  Capacity:  8 panels/min

 設備特點:

         a、手臂旋轉采用氣缸旋轉，結構穩定快速。

         b、具有二段式整板裝置，拍薄板不會有拱起現象。

         c、配合各種板件，可于人機面板設定參數，達到最佳工作效能。

         d、吸板方式以12只吸盤組吸板，可任意調節。

         e 、所搭配的板架與行業內同系列設備可通用。

         f 、設備耗電，耗氣低且具有省電模式

 Features:

a. Robot arm is driven by cylinder which is stable and  precise.

b. Equipped with alignment device via 2 speeds not to cause bends when arranging thin board.

c. Setting parameters on the man-machine interface to cooperate with different panels to achieve the best efficiency.

d. 12 group of suction trays are used to suck the panel.

e. The pallet used on this device is current.

f. With low power consumption and air consumption and it also has a power saving model.