斜立式收放板機
用于外層有孔的PCB板的收放板.如干膜前處理、防焊前處
理、沉銅前后處理、噴錫前處理、粗磨機
Be used for loading and unloader the PCBs with holes on the surface in O/L treatment line. Such as pretreatment of dry film, pretreatment of solder mask, pre /post-treatment of immersion copper, pretreatment of tin spraying and primary grinding machine.
設備規格/Device Spec:
a.長x寬x高(L1760*W1255*H1183)
b.工作高(STD)/Working Height: ：WH=900±25 mm
c.適用板件規格/PCB Size: Max610mm*610mm Min: 300mm*300mm
厚度/Thickness: 0.3mm-3.2mm 產速/Capacity:8panels/min
設備特點/Features:
1、較適用于表面有孔的板件。
2、具有二段式整板裝置，拍薄板不會有拱起 現象。
3、配合各種板件，人機面板調整參數，達到最佳工作效能。
4、可智能區分板件的張數，確保每次收放出一片板。
5、整體結構穩定實用。
6 、設備耗電，耗氣低且具有省電模式。
1. Apply for the board with holes on its surface.
2. Equipped with alignment device via 2 speeds not to cause bends when arranging thin board.
3. Setting parameters on the man-machine interface to cooperate with different panels to achieve the best efficiency.
4. It can judge the panel pieces intelligently to make sure that one piece at one time.
5. The whole machine is of great stabilization and practical usefulness.
6. With low power consumption and air consumption and it also has a power saving model.
| 上一主題：斜立式夾紙收板機 | 下一主題：薄板自動刨邊線 |