水平式( 收) 放板機
主要用于內層無孔的PCB板的放板. 如:內層前處理、化學前處理、自動線、減銅線磨邊線.
It is mainly used for loading the PCBs without holes on the surface in I/L treatment, such as pretreatment of I/L, pretreatment of chemical, automation line, copper-reducing line and edge
grinding line.
設備規格/Device Spec:
a.長x寬x高(L1500*W1080*H1650)mm
b.工作高(STD)/Working Height: WH=900mm±25 mmc.適用板件規格： Max:610mm*610mm Min：300mm*300mm
厚度/Thickness: 0.1mm-3.2mm 產速/Capacity: 10panels/min
設備特點/Features:
1、橫移采用低噪音模組傳動，其穩定美觀。
2、具有二段式整板裝置，拍薄板不會有拱起 現象。
3、配合各種板件，人機面板調整參數，達到最佳工作效能。
4、升降機構采用滾珠絲桿傳動，其穩定耐用。
5、所有機構設計合理，設備使用方便。
6 、設備可智能區分板件張數確保每次放一片板。
7 、設備耗電，耗氣低且具有省電模式
1. It features in low noise, stable performance and a good configuration.
2. Equipped with alignment device via 2 speeds not to cause bends when arranging thin board.
3. Setting parameters on the man-machine interface to cooperate with different panels to achieve the best efficiency.
4. Lifting structure adopts ballscrew to drive which is stable and durable.
5. All the structures are in reasonable designs, so it is convenient to operate the equipment.
6. It can judge the pieces of the panels intelligently to make sure that one piece at one time.
7. With low power consumption and air consumption and it also has a power saving model.
| 上一主題：DMSE 線 | 下一主題：粘塵機 |